Problem with CC3200 and LCD5110 Library

Hi community,

I have a problem using the LCD_5110 Display library with my CC3200 Launchpad.

The Compiler does not throw any error but the main Example sketch is not working. The Display just stay white like dead. I double checked the pin configuration but I con not find the problem.

With the example Sketch:

https://github.com/sparkfun/GraphicLCD_Nokia_5110/blob/master/Firmware/Nokia_5110_Arduino_Example/Nokia_5110_Arduino_Example.ino

everything works fine but with the same pin configuration and wiring the example sketch

https://github.com/energia/Energia/blob/master/examples/7.Display/LCD_5110/Examples/LCD_5110_main/LCD_5110_main.ino

Is not working at all.

I use the following pin configuration:

LCD_5110::LCD_5110() { // pins names in MSP430G2553
LCD_5110(6, // P2_2 Chip Select
3, // P2_4 Serial Clock
4, // P2_0 Serial Data
5, // P2_3 Data/Command
7, // P1_0 Reset
2, // P2_1 Backlight
PUSH2); // Push Button 2
}

Does anybody have some advice for me?