Nokia 1202 LCD Booster Pack: Pin outs
Background:
First Post.
Windows 7 OS
Launch Pad :MSP EXP-430G2 (rev.1.5) M430G2553 20 pin chip
Nokia LCD 1202 Booster Pack (430things Nokia1202 v4-5 ,one with 5 push buttons).
IDE:Energia 11.
Many many Thanks to Github/Spirilis for Nokia1202 libraries and SPI fork library for LCD 9 bit operation. Have successfully ran Nokia 1202”hello world” and “ ADCread _1202” examples.
Question:
I would like to know pin-outs documentation for Nokia 1202 LCD booster pack?(i.e. Pin1 =Vcc,pin 20 = Gnd. Etc.)? By trial and error I found display backlight on pin P1_4 rather than P2_5 as suggested in “ADCread_1202” example.
Have also noted “power on reset” issue, where I have to keep “reset” button on Launch Pad depressed while plugging into USB port(powering system on) ,otherwise pre-loaded program won’t run. Any suggestions ?
With kind Regards