Linux ws.jgscrater.com 3.10.0-327.36.3.el7.x86_64 #1 SMP Mon Oct 24 16:09:20 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux
MSP430f5529LP
educational boosterpack mark 2
lsusb output:
# w/ launchpad in Bus 001 Device 004: ID 0451:2046 Texas Instruments, Inc. TUSB2046 Hub Bus 001 Device 002: ID 0409:005a NEC Corp. HighSpeed Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub # w/ launchpad in Bus 001 Device 005: ID 2047:0013 Texas Instruments Bus 001 Device 003: ID 046d:c31c Logitech, Inc. Keyboard K120
I've run several of the examples that appear under the "edu mark 2" list.
The ones that do output to the serial port -- I never see.
I was guessing that somehow the output would show up in a terminal window,
but, no.
Oh, I went to rpmforge and installed the epel....rpm, but yum -y install putty
still does nothing -- no such rpm. I have no cu, no minicom, no... So, assuming
I should see something, where do I find it?
I did a search on linux serial and it seemed that
the issues I found had to do with energia/uploading. I can upload the stuff,
I see the blinking light, and energia windows say the upload completes.
So I'm good there. (Examples to play the tunes work, and so on.)
If this isn't the right place to post, tell me. I considered stuff under Energia
but.... decided against it.
Do I write a C program to just endlessly read /dev/ttyACM0 or whatever?
Thx.
j.