Could it work with the msp430 (for DC motor control only)?
The schematic is here.
The 74HC595 should have no problem working at 3.3V, however the L293D specifies a minimum of 4.5V (though it should also work at 3.3V....if you're lucky).
The software shouldn't be a problem.
The schematic is here.
The 74HC595 should have no problem working at 3.3V, however the L293D specifies a minimum of 4.5V (though it should also work at 3.3V....if you're lucky).
The software shouldn't be a problem.