Firmware Update Error
HI, I have a MSP430fr5969 Board. I have written several program successfully to the board with Energia and have V2.0 or higher. On a random upload, I received an error message "FET firmware update...
View Articlecc2531 to Hyperterminal
I have a CC2531 usb dongle.. I want to use it as a Zigbee transceiver. I have used the ZNP as it was in Zigbee stack. what changes do i need to make to this given ZNP to use it as a zigbee transceiver?...
View ArticleClik here to view.
Using RTC as an ultra-low-power timer for the likes of MSP432
I posted a blog entry about how I used the STM32L1 RTC (a few years ago) as a tickless, ultra-low-power timer for my RTOS. http://www.indigresso.com/_blog/?p=181 The MSP432 has a similar problem....
View ArticleG2553 4 wire SPI Slave always seems enabled
The following code accepts over the SPI bus a byte from the master to control 8 relays, and returns the state of 8 inputs. I am running into an issue where the slave always responds to the SCLK,...
View Articlewhat is usbserial library in Energia??
I've noticed a library called usbserial in energia ,which I haven't found in arduino. What is this library all about?? Does this library allows us to communicate our msp430 to the computer directly...
View ArticleEnlarging size of Energia as displayed on PC screen
I am able to use the latest version of Energia (0101E0015) but the displayed items are way too small. I have tried to change the PC screen resolution and size but nothing helps to enlarge the Energia...
View ArticleHow to use mspgcc?
I've used used energia for programming, but i wanated to move towards the native c programming for msp430g2 series. So how to use mspgcc to compile c code and generate hex files?? I heve downloaded the...
View ArticleLow Power Modes with an ISR
Please help, I am trying without success to write a program which uses the low power modes. My objective is to use an ISR to turn an led on for one second, then turn it off. I have looked at several...
View ArticleStrategic advice for MSP presentation
Hi everyone, I wanted some strategic advice from the Forum on an MSP event I'm organizing in Rome next week (everyone is invited, the link is at the end of the post). I'm trying to introduce the MSP...
View ArticleEnergia MT made Hackaday
http://hackaday.com/2015/04/17/energia-multitasking-uses-rtos-on-msp432/
View ArticleClik here to view.
MSP430 Alarm Clock with F5529 and Seeed Grove BoosterPack
This piece of code was made possible by Trey German, Robert Wessels, and Cathy Wicks of Texas Instruments. Without Trey's knowledge and Cathy's encouragement, I wouldn't have been able to make this...
View ArticleConnecting Multiple MSP430G2553 to a Single Computer
Hi, I am trying to connect two MSP430G2553 launchpads (in order to program/control) to a single computer. I thought it would be a simple task, but something is not going right. Do I have to run two...
View ArticleClik here to view.
MSP430+CC2500 board
Hey all, Been awhile since i've posted something. Here was a small portable 2.4GHz transceiver(CC2500) that I made. This can operate via battery or USB power. USB charges the battery. Has reverse +...
View ArticleTouch cap
Hi everyone, Can I use GPIO of MSP430FR2033 with capacitive touch sensing function ? I can not find pinosc function in this line. Plz help to explain. Thanks inadvanced.
View ArticleAsynchronous Serial Communication between Two MSP430G2553
I am looking for a sample project developed in Energia which implements asynchronous serial communication between two MSP430G2553 boards. The overall system is supposed to work as a chatting system....
View ArticleRedBearLabs CC3200 - energia error with Serial Port
I'm posting in the RedBearLab support as well - but I wanted to post the error I'm getting from Energia in the forums to see if anyone can help. I got the software from RedBearLab installed as well as...
View ArticleCC3200 MOD bricked with static IP
Greetings, I'm almost at the end of my project with my CC3200 sensor board, and I want to thank again people who helped me here, for the SFLS lib and my printf issues. From the begining with...
View ArticleClik here to view.
Working with a Gameboy Printer
I've got a lot more work for this project - but I wanted to post what I have so far in case anyone else is interested in the code. I started with the Arduino library at...
View Articleccs code composer for mac / os x
Just in case anybody is interested, there is an ccs os x beta available since end of march:...
View ArticleClik here to view.
SPI Change Clock Phase
Hi, I am trying to change the SPI clock phase for my project. I am wondering if it is possible in energia. Below is the corresponding data bits from the family guide that I have found: I am...
View Article