When I run mspdebug from the command line I get this failure:
____
Microsoft Windows [Version 6.0.6002]
Copyright © 2006 Microsoft Corporation. All rights reserved.
C:\Users\Mark>mspdebug
You need to specify a driver. Try --help for a list.
C:\Users\Mark>mspdebug rf2500
MSPDebug version 0.20 - debugging tool for MSP430 MCUs
Copyright © 2009-2012 Daniel Beer <dlbeer@gmail.com>
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
rf2500: failed to open RF2500 device.
____
But mspdebug can see the Launchpad:
_______
C:\Users\Mark>mspdebug --usb-list
Devices on bus 000:
000:000 0451:f432 eZ430-RF2500 [serial: 56FF42047150410A]
C:\Users\Mark>
___________________________
Running testlibusb-win.exe gives me this:
___________
DLL version: 1.2.6.0
Driver version: 1.2.6.0
bus/device idVendor/idProduct
bus-0/\\.\libusb0-0001--0x0451-0xf432 0451/F432
- Manufacturer : Texas Instruments
- Product : MSP430 Application UART
- Serial Number: 56FF42047150410A
bLength: 18
bDescriptorType: 01h
bcdUSB: 0110h
bDeviceClass: 00h
bDeviceSubClass: 00h
bDeviceProtocol: 00h
bMaxPacketSize0: 08h
idVendor: 0451h
idProduct: F432h
bcdDevice: 0100h
iManufacturer: 1
iProduct: 5
iSerialNumber: 3
bNumConfigurations: 1
wTotalLength: 53
bNumInterfaces: 1
bConfigurationValue: 1
iConfiguration: 0
bmAttributes: 80h
MaxPower: 50
bInterfaceNumber: 0
bAlternateSetting: 0
bNumEndpoints: 3
bInterfaceClass: 2
bInterfaceSubClass: 2
bInterfaceProtocol: 1
iInterface: 5
bEndpointAddress: 82h
bmAttributes: 03h
wMaxPacketSize: 64
bInterval: 255
bRefresh: 0
bSynchAddress: 0
bEndpointAddress: 03h
bmAttributes: 02h
wMaxPacketSize: 64
bInterval: 255
bRefresh: 0
bSynchAddress: 0
bEndpointAddress: 83h
bmAttributes: 02h
wMaxPacketSize: 64
bInterval: 255
bRefresh: 0
bSynchAddress: 0
______________
So it looks like libusb-win32 is installed right. It also looks right in Device Manager.
This is on Vista64. The Launch pad has the 2553 installed but I backed up to the original chip that I had used under gdb in a previous msp430 tool chain I know worked, same error.
The mspdebug I am using is from the pre compiled MSP chain XPG provides, just to limit the variables. I have tried forcing the serial number but that made no difference. Do I need another version of mspdebug than the current (0.20?) that's in the provided chain?
Any ideas on what to do next?
If there are any logs that would be useful in figuring this out just ask.
After going back over the install several times and reading posts till my eyes are blurry I am still stumped.
Help!
Mark